EL/Z6V2/PE/Ex-1G JOLA floor electrode in Ex version

Description

The EL/Z6V2/PE/Ex-1G JOLA floor electrode in the Ex version is designed to detect leakage of an electrically conductive liquid in a pipe channel, e.g. due to a burst pipe. without the Z10 cable break monitoring unit fitted.

The Ex panel conductive electrodes are equipped with two electrode plates as sensing elements: 1 control electrode and 1 earth electrode.

If the two electrode plates of the conductive electrode of the Ex panel come into contact with an electrically conductive liquid (e.g. water, acid, etc.), an electrical contact is established and an alarm signal is given via the connected conductive relay of the Ex electrode.

Before use, we recommend viewing the attached pdf documents under the Documentation tab.

Features EL/Z6V2/PE/Ex-1G

• design: 1 control electrode and 1 earth electrode
• Sensitive element: 2 electrode plates of 316 Ti stainless steel, each 24 mm in diameter
• Housing: PP and cast resin
• electrical connection: screw/press connection
• temperature range: -20 °C to +60 °C (higher temperatures on request)
• cable break monitoring: with built-in Z6V2 cable break monitoring unit
• length of connecting cable: see technical data sheet

For more information, please see the attached pdf documents under the Documentation tab.

Examples of use

• Using the Ex floor electrode to detect conductive fluid leaks in a pipe channel

Welcome to the article ”Conductive Measurement of Liquids”