PGS23.063 Bourdon pressure gauge with switchable contacts WIKA
Po naročilu. Pošljite povpraševanje.
- Safety version S3 according to EN 837
- up to 2 switch contacts per instrument
- Electronic contact instruments for PLC applications
- instruments with inductive contacts for use in hazardous areas
Description
PGS23.063 Bourdon pressure gauge with switchable contacts WIKA is used for monitoring differential pressures, the instrument allows switching and display.
Where process pressure needs to be specified locally and circuits need to be switched at the same time, the PGS23.063 switchGAUGE finds its application.
Switch contacts (electrical alarm contacts) form or break circuits depending on the position of the pointer of the indicating instruments. The instrument pointer (actual value indicator) moves freely over the full scale range, independent of the setting. You can adjust the set cursor using the removable adjustment key in the window.
You can also set multiple contacts to a single set point. The contact is triggered when the actual value pointer moves above or below the desired set point.
The pressure gauge is manufactured in accordance with DIN 16085 and meets all the requirements of the relevant standards (EN 837-1) and regulations for the on-site indication of the working pressure of pressure vessels.
Magnetic contacts, reed switches, inductive contacts and electronic contacts are available as switch contacts. Inductive contacts can be used in hazardous areas. Electronic contacts and reed switches can be used to trigger programmable logic controllers (PLCs).
Features of PGS23.063
- Nominal size in mm: 63
- accuracy class: 1.6
- Scale range
- 0 … 4 bar to 0 … 400 bar
- other units available (e.g. psi, kPa)
- or any other equivalent pressure and vacuum ranges
- scale
- single scale
- Option:
- double scale
- pressure limitation
- constant value 3/4 x full scale
- fluctuates 2/3 x the value of the full scale
- short time Full scale value
- connection point
- bottom bracket (radial)
- lower back support
- process link
- G ¼ B
- G ⅛ B
- ¼ NPT
- ⅛ NPT
- others on request
- permissible temperature
- medium +100 °C maximum
- environment -20 °C … + 60 °C
- effect of temperature
- when the temperature of the measuring system deviates from the temperature reference value (+20 °C): max. ± 0.4 % / 10 K full scale
- Safety of the S3 version of the enclosure according to EN 837:
- with solid barrier wall (Solidfront) and back exhaust
- filling the housing
- without
- wet materials:
- Process connection, 316L stainless steel pressure element, option Monel (model PGS26)
- non-moistened materials
- housing, stroke, stainless steel bayonet ring
- aluminium dial, white, black
- Instrument pointer Aluminium, black
- Aluminum setting pointer, red
- polycarbonate window
- Option:
- laminated safety glass
- Option:
- ingress protection to IEC/EN 60529 IP54
- Electrical connection Cable length 2 m, facing down and to the right
- material: PVC
- others on request
For more features of the PGS23.063 and additional options, we recommend viewing the attached .pdf documents under the Documentation section.
Accessories
The new WIKA pressure measurement system is an EMICO emission meter that ensures the safety of people and the environment in critical processes. The system consists of pressure gauges of models 2xx.30 in the safety version or S-3 in accordance with EN 837-1 (S3) and a valve to prevent fugitive emissions:
- IVM stop and vent valve with WIKA flange
- IV10 needle valve for WIKA pressure gauges
- IV11 multiport needle valve for WIKA pressure gauges
- IV20 shut-off and vent valve for WIKA pressure gauges
- IV21 shut-off and vent valve for WIKA pressure gauges
The measuring instrument and the valve are connected by a lightweight swivel adapter with a special sealing packing. The system is leak tested in accordance with TA Luft (VDI 2440) for fugitive emissions. The EMICO system measures pressures from 0 to 420 bar or 6000 psi. In the event of a failure due to high overpressure, the S-3 safety version protects the user from injury.
The compact measuring system can be started up immediately after delivery. The free rotating swivel adapter allows 360° positioning of the display and easy disassembly of the measuring instrument (in case calibration is required). In accordance with ISO 15848-1 and TA-Luft, S-3 pressure gauges can be combined with top valves in a fugitive design to form EMICO gauges.
To find out more about the app itself, click here.
Areas of use, applications
- process control and regulation
- plant control and circuit switching
- for gaseous and liquid aggressive media that are not highly viscous or crystallising, even in aggressive environments
- chemical industry, petrochemical industry, power plants, mining, offshore, environmental technology, mechanical engineering and general plant construction
ELPRO designation: MAN-PGS23.063
Povpraševanje
You may also like…
For your victories, with our solutions. Call us:
Contact us.
Call us:
+386 (0)2 62 96 720
Email us:
[email protected]