EBI 12-T490 data logger for measurement in EBRO steam steriliser

Description

The EBI 12-T490 is a validation data logger for process validation in a steam sterilizer and batch control in production.

The Logger has quite flexible cable probes that allow precise positioning of the sensor. Very thin temperature sensors with a diameter of 1.2 mm at the tip of the sensor allow very fast response times.

When using the recorder in a WD, it is strongly recommended to attach the probes with silicone cable ties. The EBI 12-T490 is ideal for measuring temperature and humidity in sterilisation chambers, especially for accurate monitoring of the sterilisation process in cavities and other confined spaces.

 

Who is the EBI 12-T490 suitable for?

• Healthcare: can be used in hospitals and clinics to monitor autoclave sterilisation processes, recording and documenting temperature and time data.
• Pharmaceutical industry: can be used in pharmaceutical companies where it is necessary to monitor sterilisation processes and temperature conditions in the production of medicines.
• Food industry: can also be used in the food industry to monitor sterilisation processes and ensure food safety.
• Research facilities: can be used in research facilities to monitor temperature conditions in various experimental environments.

In general, the EBI 12-T490 is suitable for anyone who needs accurate monitoring of temperature and time in sterilisation processes, including autoclaves and other types of sterilisers.

 

Technical specifications

• operating temperature: -20 °C … +150 °C
• measuring range: -20 °C … +150 °C
• accuracy:
  • ±0.2 °C (-20 °C … 0 °C)
  • ±0.1 °C (0 °C … +120 °C)
  • ±0.05 °C (+120 °C … +140 °C)
  • ±0.1 °C (+140 °C … +150 °C)
• resolution: 0.01 °C
• two sensors: fi 1.2 mm, radial (side) connection
• data memory: 2 x 50,160 measurements
• Sensor: Pt1000, class A
• measuring interval: 250 ms … 24 hours
• real-time data transmission: yes
• storage temperature: -20 °C … +70 °C
• measurement methods:
  • infinite measurement
  • measured at the start time
  • start immediately to the end of memory
  • start/stop of measurement
• battery: lithium, 3.6 V, user replaceable
• dimensions: (Ø x H) 48 mm x 24 mm
• weight: approx. 90 g
• Housing material: stainless steel 316 L / PEEK
• Protection class: IP68
• factory calibration certificate: 0 °C, +60 °C and +134 °C

 

Standards and directives

• (EC) 1935/2004 – materials and articles that come into contact with food
• ISO 17665 – Sterilisation of health care products
• 2014/53/EU – Radio Equipment Directive – RED

 

Software

• Set SI 2150 – Winlog.pro
• Set SI 1200 – Winlog.pro
• Set SI 3300 – Winlog.med
• Set SI 2110 – Winlog.med
• Set SI 11o0 – Winlog.med

 

Video

Read the articles:

• THE DIFFERENCE BETWEEN A HYDROMETER AND A HYGROMETER
• Measuring room temperature and humidity
• Loggers – process monitoring (cold chain, HACCP, transport, storage, process control…)
• Process monitoring, routine controls and validations
• Quality of EBRO loggers
• Data loggers for process validation

 

Other designations: EBI12-T490, EBI12T490, EBI-12-T490