TTU-KAB-070 industry temperature sensors (RTD) with connection cable, surface-mounted in square housing

Description

TTU-KAB-070 industry temperature sensors (RTD) with connecting cable are surface sensors in a square housing and a common design for measuring the temperature of flat surfaces for general purpose applications.

The cable sensor, as it is most often called, is a common design for a variety of purposes.

It can be installed in the protective sleeves of tanks, pipelines or with a separate installation element such as compression couplings, flanges or on its own without installation elements.

The maximum use temperature depends on the insulation of the connecting cable.

A safety spring protects the joint with the cable and allows adequate flexibility, but can be supplied without the spring if it would interfere with the installation.

There are over a thousand temperature sensor products in our product configurator, and the sheer number tells you that this is really about customisation for the purpose of measurement.

The right choice will achieve the intended use, but using the same sensor for different purposes across the board does not work and is not cost-effective (breakage, disconnection, damage).

For smaller users, simpler versions are available.

 

Temperature ranges

• -40 to 80 °C with PVC connection cable
• -40 to 200 °C with silicone connection cable
• -200 to 200 °C with PTFE connection cable
• -40 to 400 °C with metal braided cable
• -200 to 850 °C in special construction, if required

 

Choice of implementation

Select the desired design using the code list in the Documentation tab, or call us on 02 62 96 720 or write to us on the Enquiry form and let us help you make your choice.

 

We recommend a mounting length of at least ten times (10x) the pipe diameter, shorter lengths have a negative effect on the accuracy of the measurement.

The dimpled tip is chosen for faster air measurements (ventilation) and the tapered tip for fast measurements of other media. It can be in Ex version or in combination with a DIN rail transducer .

 

The TTU-KAB-070 can be of various lengths, straight, angled or bent, with different connection cables, without or with different connectors for portable instruments.

 

Benefits of industry versions

High accuracy, long life and stability. All this is achieved through strict quality control of materials and processes.

 

Protection for aggressive media

The joint can be protected with PTFE protection for aggressive media, if necessary also the cable section, if required.

 

Watertight design

For temperature sensors with silicone connection cable, you can order a watertight version.

 

TTU-KAB in EX version

For use in EX rooms/areas, we manufacture/supply TTU-KAB
with ATEX certificate
(Zone 2 with EX transducer, Zone 0 and 1 with additional barrier).

 

Calibration

All temperature sensors can also be ordered
with accredited certificate
or with verification only in the desired range, and all can be ordered custom-made.

 

Custom

All temperature sensors can be made to your specifications and requirements. The most common designs are presented on the website, but in practice, production is mainly made to order.

Call or email us and we will help you determine/choose the most suitable implementation for you based on your process requirements.

Standard delivery time is 3 working days, but other options include
urgent deliveries within 24 hours (emergency).

 

How to order a sensor?

From the Inquiry box, please send your requirements, specifying the operating temperature, the desired dimensions and the intended use. Don’t forget your phone number and email address.

We will call you to confirm your offer before implementation.

NO WORries: we won’t do anything without your prior approval.

 

We invite you to read

• CABLE SENSORS SHOULD NOT HANG
• Total cost of ownership – ELPRO LEPENIK & CO. d.o.o.

 

TTU-KAB-070 industry temperature sensors have a 5 year manufacturer’s warranty and are made in Slovenia.