TTU-GLA-020/MP industry temperature sensors; RTD with analogue or digital output

Iskanje

Šifra: TTU-GLA-020/MP


Po naročilu. Pošljite povpraševanje.

Dobavni rok: 3 working days or urgent

  • Number of sensors: 1 or 2
  • measuring element: Pt100 or Pt1000
  • Accuracy class: A or A+
  • Sensor binding: 2, 3 or 4 water
  • Installation length: x (mm)
  • Process connection: G 1/2” or x
  • diameter of the protective tube: 9 mm or x
  • x: select as desired; bold: standard version
  • INOR measuring transducer, output 4 … 20 mA or 0 … 10 V
rotronicELPRO

Description

TTU-GLA-020/MP are industry temperature sensors with built-in trans ducer and recommended for applications between 0 and 150 °C where you need, for example, Pt100 converted to 4 … 20 mA, temperature linear.

TTU-GLA-020/MP have a process connection at the connection head, so the scope is limited – there is no protective neck to protect the connection head, converter and connections from low or high temperatures.

  • if you need a higher or lower working range, select TTU-GLA-010/MP or other

Transducers can also perform other tasks, such as:

  • cycle counting
  • control sensor error (sensor error )
  • system error
  • correction of sensor error (sensor error )
  • correction of system error
  • galvanic isolation
  • 50 point linearisation
  • HART
  • use in Ex zones
  • working in demanding work areas

… functions depend on the choice of converter model.

 

The measuring range and output of the transducer are user-configurable with the INOR software.

  • new series of inverters allow configuration or setup with smartphones with NFC® (Near-field communication) reader and Bluetooth®

 

Choice of implementation

Select your preferred design using the code list in the Documentation tab, or simply call us on 02 62 96 720 or write to us on the form on the right and let us help you make your choice.

We have also prepared a set of very common versions: , which are also available in our online shop:

 

Benefits of industry versions

High accuracy, long life and stability. All this is achieved through strict quality control of materials and processes.


INOR measuring transducers
have excellent stability over the years and are extremely reliable.

 

Thermowell version

Temperature sensors with protective housing or thermowell versions have a replaceable measuring cartridge inside for easy replacement or calibration without interrupting the process.

Thermowell is also possible with TTU-GLA-020/MP, but in a limited temperature range. The thermowell itself can be further protected with PTFE or similar protection for aggressive media. All external parts are welded to the housing.

  • the recommended minimum installation length (depth) is 10 times the outside diameter of the pipe
  • may be shorter but with an effect on the accuracy of the measurement

The dimpled version is chosen for faster air temperature measurements (ventilation), while the tapered tip is used where very fast measurements are required.

 

The connection head incorporates a measuring transducer with analogue or digital output, most commonly 4 … 20 mA or 0 … 10 V, also with HART.

It can be mounted in place of the connection base (standard version) or in the cover of the connection head.

All temperature sensors can also be ordered with accredited certification or with verification in the desired range only, and all can be custom-made.

 

TTU-GLA-020/MP in ON SITE CAL and EX versions

For
calibration
directly in the production process, we produce the TTU-GLA-020/MP in ON SITE version.

For use in EX rooms/areas, we manufacture/supply the ATEX-certified TTU-GLA-020/MP (zone 2 with EX transducer, zone 0 and 1 with additional barrier).

 

Calibration

Temperature sensors can be calibrated after manufacture to provide you with
accredited calibration certificate.

 

Custom

All temperature sensors can be made to your specifications and requirements. The most common designs are presented on the website, but in practice, production is mainly made to order.

Call or email us and we will help you determine/choose the most suitable implementation for you based on your process requirements.

Standard delivery time is 3 working days, but other options include
urgent deliveries within 24 hours (emergency).

 

TTU-GLA-020/MP industry temperature sensors have a 5 year manufacturer’s warranty and are made in Slovenia. INOR transducers come with a 5-year manufacturer’s warranty and are made in Sweden.

 

You are invited to read

Total cost of ownership – ELPRO LEPENIK & CO. d.o.o.

Povpraševanje

    You may also like…