TTU-GLA-070 industry temperature sensors (RTD), process connector, reinforced protective neck
Po naročilu. Pošljite povpraševanje.
Delivery time: 3 working days or urgent
Standard:
- Number of sensors: 1 or 2
- measuring element: Pt100 or Pt 1000
- Accuracy class: A or A+
- Sensor binding: 2, 3 or 4 water
- Installation length: x (mm)
- length of the protective neck: 55 mm or x
- Process connection: G 1/2” or x
- diameter of the protective tube: 6 mm or x
- see technical data sheet for the rest
Description
The TTU-GLA-070 Industry Temperature Sensor (RTD) has a connection head and a process connection on the protective neck (with measuring insert).
These sensors are very common designs for measuring temperature in industrial processes (liquids, gases, vacuum).
The TTU-GLA-070 is particularly suitable where a protective housing is already installed or for fast-response measurements directly in the media.
- for measurements directly in the media, appropriate tube protection must be selected
A reinforced protective neck above the process connection increases the structural strength.
- the sensor head rotates
Features and benefits of the TTU-GLA-070
- fast response due to installation in an existing housing or directly into the media
- Reinforced protective neck – structural strength
- spare measuring insert, hose protection (ETFE, ECTFE, PTFE), Ex, ON SITE CAL
- accessories: swivel head, see coding table
Main features
- for temperatures from -250 °C to +850 °C
- standard in class A (±0.15 °C at 0 °C according to EN 60751 : 2008)
- with analogue or digital output for TTU-GLA-070/MP version
- recommended min installation length (depth) is 10 times the pipe outer diameter
- measuring transducer: 4 … 20 mA, 0 … 10 V, HART
Use
- industry standard, immersion measurements
Choice of implementation
Select the desired design from the code list in the Documentation tab and call 02 62 96 720 or write to us on the Enquiry form and let us help you make your choice.
We have also prepared a set of very common versions for you: the TTU-GLA-070, which is also available in our online shop:
The dimpled tip is chosen for faster air measurements (ventilation) and the tapered tip for fast measurements of other media.
The sensor can also be available in Ex version or in combination with a transducer, see
TTU-GLA-070/MP
.
Benefits of industry versions
High accuracy, long life and stability. All this is achieved through strict quality control of materials and processes.
Protection for aggressive media
The process connection can be protected with PTFE protection for aggressive media, and other parts of the housing if required.
Here
you can see an example.
TTU-GLA-070 in ON SITE CAL and EX versions
For calibration directly in the production process, we produce the TTU-GLA-070
ON SITE
.
For use in EX rooms/areas we manufacture/supply the TTU-GLA-070
ATEX certified
(Zone 2 with EX transducer, Zone 0 and 1 with additional barrier).
Recommendation
We recommend a mounting length of at least ten times (10x) the pipe diameter, shorter lengths have a negative impact on the accuracy of the measurement.
Additional services and equipment
- 24 h urgent production
- temperature calibration in an ELPRO Calibration Laboratory accredited to 17025;
instructions for ordering calibration
- Accuracy verification – no accredited certificate, single point verification –
enquire
- connection cables, connectors and extensions
- leasing of technical support
Custom temperature sensor and order
All temperature sensors can be made to your specifications and requirements. Together with our experts, we design the best solution for you.
We are no strangers to special and unusual challenges. The most common designs are presented on the website, but in practice, production is mainly made to order.
Call or email us and we will help you determine/choose the most suitable implementation for you based on your process requirements.
Standard delivery time is up to 5 working days, urgent deliveries within the deadline are possible
24 h
.
How to order a sensor
Use the Inquiry box to send your requirements, specifying the operating temperature, the desired dimensions and the intended use.
Don’t forget your phone number and email address. We will call you and/or send you a quotation to confirm it before implementation.
Find out more about making bespoke temperature sensors here.
Don’t worry, we won’t do anything without your prior approval.
Guaranteed
– 24 h support
– 100% output control
– long life in a circular economy system
– product repairability
– service and
calibrations
ELPRO Adhesive temperature sensors have a 5-year manufacturer’s warranty and are made in Slovenia.
You are invited to read
Povpraševanje
You may also like…
For your victories, with our solutions. Call us:
Contact us.
Call us:
+386 (0)2 62 96 720
Email us:
[email protected]