EBI 12-TP237 data logger for routine EBRO monitoring
Po naročilu. Pošljite povpraševanje.
Delivery time: approximately 2-3 weeks
- measuring range: 0 °C … +150 °C, 1 mbar … 4000 mbar
- Memory: 2x 33,440 memory points
Standards and Directives:
- ISO 17665 – Sterilisation of medical products
- 2014/53/EU – Radio Equipment Directive RED
- (EC) 1935/2004 – materials and articles that come into contact with food
- ISO 15883 – razure For Washable washing machines
Description
EBI 12-TP237 data logger for routine monitoring EBRO is a data logger for routine monitoring and batch monitoring in WD and steam sterilizers. The recorder is used for routine process control and validation in steam sterilisers, washer-disinfectors.
It contains a hose connector and internal thread M10x1, and an external rigid axial temperature sensor with a diameter of 1.95 mm.
This data logger is part of the essential kit recommended for every medical device reprocessing unit to continue collecting and storing independent measurement data during reprocessing operations, even in the event of a network failure.
Who is the EBI 12-TP237 suitable for?
- Healthcare facilities: companies and institutions involved in saving lives, such as hospitals, clinics and health centres, where sterilisation procedures are carried out on medical devices.
- Supervisory bodies: government agencies that monitor sterilisation standards in healthcare facilities.
- Manufacturers: companies that produce medical devices and need accurate and reliable control of sterilisation procedures.
- Other: all those that sterilise medical devices, including laboratories and dental practices.
Technical specifications
- operating temperature: 0 °C … +150 °C
- measuring range: 0 °C … +150 °C, 1 mbar … 4000 mbar
- temperature accuracy:
- ±0.1 °C (0 °C … +120 °C)
- ±0.05 °C (+120 °C … +140 °C)
- ±0.1 °C (+140 °C … +150 °C)
- pressure accuracy:
- ±20 mbar
- resolution: 0.01 °C
- data memory: 2 x 33,440 measurements
- temperature sensor: pt1000, class A
- pressure sensor: piezoresistive pressure sensor
- measuring interval: 250 ms … 24 hours
- Real-time data transmission: yes
- storage temperature: -20 °C … +70 °C
- measurement methods:
- infinite measurement
- measurement at start time
- instant start to the end of memory
- start/stop measurement
- battery: lithium, 3.6 V, user replaceable
- dimensions: (Ø x H) 48 mm x 24 mm
- weight: approx. 90 g
- Housing material: stainless steel 316 L / PEEK
- Protection class: IP68
- factory calibration certificate:
- 0 °C, +60 °C and +134 °C
- 100 mbar and 3,100 mbar (at +25 °C)
- 3,100 mbar (at +134 °C)
Standards and Directives:
- ISO 17665 – Sterilisation of medical products
- 2014/53/EU – Radio Equipment Directive RED
- (EC) 1935/2004 – materials and articles that come into contact with food
- ISO 15883 – razure For Washable washing machines
Software
- Set SI 3200 – Winlog.validation
- Set SI 2110 – Winlog.med
- Set SI 2100 – Winlog.med
- Set SI 1200 – Winlog.pro
- Set SI 2150 – Winlog.pro
Video
We invite you to read the articles
- THE DIFFERENCE BETWEEN A HYDROMETER AND A HYGROMETER
- Room temperature measurement (external influences)
- Measuring room temperature and humidity
- How to choose between EBI 3×0 and EBI 20
- Loggers – process monitoring (cold chain, HACCP, transport, storage, process control…)
- Process monitoring, routine controls and validations
- Quality of EBRO loggers
Other designations: EBI12-TP237, EBI12-TP237, EBI12TP237, EBI12TP237, EBI-12-TP237, EBI-12-TP237
Povpraševanje
You may also like…
For your victories, with our solutions. Call us:
Contact us.
Call us:
+386 (0)2 62 96 720
Email us:
[email protected]