PGT43.100 Bourdon pressure gauge with output signal for the process industry WIKA

Description

The PGT43.100 Bourdon pressure gauge with output signal for the WIKA process industry is used for pressure measurement of gaseous and liquid media.

Nominal size: 100 mm

Where the process pressure has to be specified locally and at the same time a signal has to be transmitted to a central control or remote centre, the intelliGAUGE® model PGT43 (patent, property right: e.g. DE 202007019025) can be used.

The PGT43 is based on the 43x.30 model of the high quality stainless steel safety pressure gauge with a nominal size of 100 or 160. The pressure gauge is manufactured in accordance with EN 837-3.

The intelliGAUGE PGT43 meets all the safety requirements of the relevant standards and regulations for the on-site display of the working pressure of pressure vessels.
The robust diaphragm metering system produces a rotation of the pointer proportional to the pressure.

The electronic angle encoder, proven in safety-critical automotive applications, determines the position of the camshaft – it is a non-contact sensor and therefore completely wear- and friction-free. This results in an electrical output signal proportional to the pressure, e.g. 4 … 20 mA is produced. The measuring range (electrical output signal) is automatically adjusted together with the mechanical display, i.e. the electrical zero point can also be set manually.

The WIKA electronic sensor integrated in the high-quality diaphragm pressure gauge combines the advantages of electrical signal transmission with a local mechanical display that remains readable during power failure.
This allows you to store an additional measuring point for mechanical pressure display.

To view additional options and more technical features, we recommend viewing the attached .pdf documents under the Documentation section.

 

Areas of use, applications PGT43.100

• security applications
• acquisition and demonstration processes
• for measuring points with increased overload
• simple, easy-to-read, analogue display in situ, requiring no external power supply
• Output signals 4 … 20 mA, 0 … 20 mA, 0 … 10 V for transmission of process values to the control room

 

ELPRO designation: MAN-PGT43.100