Elpro > Products > Level gauges > MFE MOLOSmembrane Mollet level membrane switch

MFE MOLOSmembrane Mollet level membrane switch

Iskanje

the level diaphragm switch is used for level measurement in containers or silos in a wide range of industries

Šifra: MFE MOLOSmembran

Po naročilu. Pošljite povpraševanje.

Delivery time: approximately 3-4 weeks

  • supply voltage: 24 V … 250 V AC or 12 V … 125 V DC
  • switching power: 4 A/250 V AC
  • operating temperature: -20 °C … +60 °C
  • sensitivity: from 60 g to 2000 g
  • IP degree of protection: IP65
  • ATEX certificates: dusty Ex-environment
  • Membrane: NBR, VITON, stainless steel
MOLLET

Dodaj na seznam želja

Področja:

,

Description

The MFE level diaphragm switch is used for level measurement in containers or silos in a wide range of industries. It can be used as a full, empty or demand sensing indicator for bulk (bulk material) in small and medium sized containers with grain sizes up to a maximum of 30 mm. The MFEF sensor configuration with comfort flange prevents the deposition of solid particles in front of the membrane. The IP rating of the housing is IP65. The simple design of this sensor provides a reliable and cost-effective solution for automatic level indication.

The MOLOSmembrane series level switches are based on a very simple and ingenious level measurement principle. They are used to measure the bulk level of solids (bulk material) and are the ideal solution for many applications, as no sensor part extends into the bin or silo.

With various options, the sensors can be optimally configured even for very harsh operating conditions. The low-cost switches offer automatic level measurement with high energy efficiency. No auxiliary or special power cables are needed to operate the MF-sensors. In addition, the switches are easy to install and operate.

MFE features

  • versatile and generally applicable
  • good price/performance ratio
  • high reliability
  • continuous operation without maintenance
  • easy installation
  • No auxiliary energy required
  • no sensor parts in the silo, hopper or container (external installation)
  • adjustable sensitivity

Using the MFE

The MFE is a membrane level switch with a plastic housing for dusty, granular and coarse granular bulk materials (bulk solids). The MFE reliably and accurately detects any required level under difficult operating conditions. It is therefore used in a variety of applications:

  • Full and empty detector in fine/fine sand silos
  • registration of fullness in the wood chip silo in the sawmill
  • level control in dry mix containers
  • control of the accumulation of material at the foot of the crane used to transport raw materials

More information about ATEX

Povpraševanje

    You may also like…

    The double diaphragm level switch is used for level measurement in containers or silos in a wide range of industries.

    MFD MOLOSmembranMFD MOLOSmembrane Mollet level membrane switch

    The MFD double diaphragm level switch is used for level measurement in…

    Read more
    Dodaj na seznam želja
    The level diaphragm switch is used for level measurement in containers or silos in a wide range of industries.

    MFA MOLOSmembranMFA MOLOSmembrane Mollet level membrane switch

    The MFA level diaphragm switch is used for level measurement in containers…

    Read more
    Dodaj na seznam želja
    The level diaphragm switch is used for level measurement in containers or silos in a wide range of industries.

    MFB MOLOSmembranMFB MOLOSmembrane Mollet level membrane switch

    The MFB level diaphragm switch is used for level measurement in containers…

    Read more
    Dodaj na seznam želja
    The level diaphragm switch is used for level measurement in containers or silos in a wide range of industries.

    MFE-A MOLOSmembranMFE-A MOLOSmembrane level membrane switch Mollet

    The MFE-A level diaphragm switch is used for level measurement in containers…

    Read more
    Dodaj na seznam želja