ENVM/PP level controller with plastic float JOLA

Description

The ENVM/PP level controller with JOLA plastic float is used for automatic level control, level indication, limit/point level detection, as an anti-drain protection or as an overfill protection for liquids in tanks or tanks.

These units are not suitable for use on vibrating machines or in places where they are subject to shock or vibration.

Composition of ENVM/ level controllers

ENVM/.. level controllers consist of:
– a float suspended in the tank,
– a fixed cylinder that is fixed above the tank so that the float is free to move up or down,
– a guide tube (to be fixed outside the tank) with a fixed cylinder installed, an internal counterweight with an integrated magnet and wall brackets,
– a rope stretched between the float and the counterweight,
– adjustable bistable magnetic switches type HMW/3/32 or HMW/1/32 mounted on transparent PVC pipe.

Mode of operation

A rising or falling liquid level in the tank causes the float to move up or down in proportion to the level. When the level of the liquid in the tank changes, the magnetic switches mounted on the outer guide tube are influenced by a counterweight magnet connected by a rope to the float.

Due to their bistable properties, magnetic switches remain in the position in which they were placed by the magnet passing through and do not switch back until the magnet passes in the other direction again.

ENVM/PP properties

• Float: SWS 190×120/PP
• float material: PP plastic
• float dimensions: 190 mm Ø x 120 mm
• cord material: PP; PTFE on request
• cord dimensions: 3 mm Ø x 2500 mm; other lengths on request
• material of the measuring tube: transparent PVC
• Dimensions of the measuring tube: 32 mm Ø x 1500 mm
• Fixed rolling material: POM
• Wall bracket material: galvanised steel; on request: stainless steel or plastic
• counterweight with integrated magnet: GG 25×160/PP/PP
• magnetic switches: HMW/3/32 or HMW/1/32
• vertical installation
• temperature range: +1 °C to +60 °C
• pressure resistance: for non-pressure applications

More technical information can be found under the Documentation tab in the attached pdf documents.