SM/V130/E/ electric EX floating ball switch JOLA

Description

SM/V130/E/ electric EX floating ball switch JOLA, when the liquid level in the tank or tank tank rises or falls, the built-in micro switch is consequently released or closed. The level switch is suitable for a variety of standing media. Not suitable for mixing boilers or tanks. It is most commonly used in systems where the level of a liquid medium in a vessel or room needs to be monitored in a simple way. Designed for installation in explosion hazardous areas, or when working with flammable media.

Mode of operation

Rising or falling liquid levels cause the float to move up or down in proportion to the liquid level. When the float is lifted, it activates a micro switch in the form of a toggle contact.

A special prerequisite for the safe use of floating switches

The thickness of the bottom of the floating switch is only 0.2 mm. The floating switch should therefore only be installed in a non-corrosive environment to allow separation of zones. For the same reason, precautions must be taken before or during the installation of the float switch to effectively protect the float switch from mechanical damage that may be caused, for example, by turbulence or heavy waves of fluid motion that need to be monitored.

Features SM/V130/E/

• float suitable for installation in zones 0, 1 and 2
• Connecting head or dock suitable for installation in zones 1 or 2
• float: stainless steel 316 Ti, 130 mm Ø
• flange made to order
• IP protection rating: IP68
• Connecting dock: made of glass fibre and graphite reinforced polyester, A301, 110 x 75 x 55 mm, IP65
• mounting: horizontal
• temperature range: 0 °C to + 60 °C
• for different liquids, depending on the length and type of float

More technical information can be found under the Documentation tab in the attached pdf documents.