RLS-6000 WIKA floating suspension switch
Po naročilu. Pošljite povpraševanje.
Delivery time: approximately 3-4 weeks
- actuator switchgear rods
- for strong contaminated media
- potential-free reed switch
- configurable position switches s via screw adjustable float
- the switching contact is freely definable(normally closed, normally open or switching contact)
Description
The RLS-6000 is a hanging, floating switch for water and wastewater. Uis used to control heavily polluted media, e.g. v lifting stations for waste water and pumping stations.
Configurable float with Raises and down z level liquids and regarding at level moving floating stick. When the floating bar reaches its final position in the housing, magnet at the end the floating rod triggers the reed switch, which is built inside the housing.
The actuation of the tab contacts with the permanent magnet is bcontact and therefore wear-free. The float can be installed and adjusted with a screw connector. This allows easy installation and precise adjustment of the desired switching point at lengths up to 50 mm.
Advantages of the RLS-6000
- suitable for sticky media
- the large dimension of the floating switch allows the operation of the switch to be unaffected bybonding
- during maintenance, the necessary cleaning can prevent the float from being overloaded withsediment
Areas of use, applications
- lifting stations For waste water
- Pumping stations
- Seeders
- Particulate-ladenmedia
Similar names: RLS6000, RLS 6000, RLS_6000
Povpraševanje
You may also like…
For your victories, with our solutions. Call us:
Contact us.
Call us:
+386 (0)2 62 96 720
Email us:
[email protected]