PyroEpsilon infrared (IR) temperature gauge CALEX
Po naročilu. Pošljite povpraševanje.
Delivery time: okvirno 2 tedna
- operating temperature range: -20 … +500 °C
- ambient temperature: 0 … 70 °C
- accuracy: ±1 % of reading or ±1 °C, whichever is greater
- repeatability: ±0.5 % of reading or ±0.5 °C, whichever is greater
- t90 response time: 240 ms
- spectral range: 8-14 μm
- maximum impedance 900 Ω (output loop)
- input impedance 50 Ω (input loop)
- maximum current draw 20 mA
- dimensions: fi 18 x 103 mm
- EMC, CE standards
Description
PyroEpsilon is a simple infrared temperature sensor with adjustable emission power. Ideally, the target should be partially reflective. Easy to use and indispensable for checking the temperature of various media, surfaces in production or general use. It is most commonly used in the food industry to measure the temperature of equipment, in the paper industry, in the electrical industry, to measure the outer layer of heaters, tanks and pipes.
The emissivity setting is adjustable via a 2-wire 4 … 20 mA input and can be continuously adjusted by a variable 4 … 20 mA source. For manual adjustment of emissivity, the PyroTune emission controller is available (optional). The sensor is also compatible with PLC outputs or controllers that can provide a 4 … 20 mA signal. If no 4 … 20 mA input is available, the emissivity setting is reset to 0.95 so that the sensor will only be suitable for measuring non-reflective non-metallic materials or painted metal.
Benefits
- choice of precision optics for large or small targets
- fast response with high stability
- quick and easy installation
- adjustable emission for all models: 0.20-1.00
- Stainless steel housing, IP65 mounted
PyroEpsilon features
- the measuring area:
LT = -20 … +100 °C
MT = 0 … 250 °C
HT = 0 … 500 °C
- 2-wire output 4 … 20 mA
- not intended for measuring body temperature
- accuracy: ±1 % of reading or ±1 °C, whichever is greater
- repeatability: ± 0.5 % of reading or ± 0.5 °C, whichever is greater
- t90 response time: 240 ms
- spectral range: 8-14 μm
- supply voltage: 6-28 V DC
- material: construction stainless steel
- dimensions: fi 18 x 103 mm
- Cable length: 1 m (longer lengths can be ordered)
- weight: 95 g
- relative humidity: up to 95% non-condensing
- EMC, CE standards
PyroEpsilon use cases
Food industry
Temperature measurement of food production equipment, including baking trays and plastic moulds. Surface temperature of PTFE-coated cylinders.
Paper industry
Use for measuring the temperature of glossy paper.
Plastics industry
Thermoforming temperatures, pre-inflation temperature of plastic bottle tubes.
Electricity industry
Measuring the temperature of painted surfaces in switchgear cabinets and generator enclosures.
For coating pipes
Measuring the temperature of the pipe during coating, where the emissivity of the surface increases during the process.
For monitoring
For example, painted bearing housings, drive shafts, cylinders and gearboxes. Measuring the turbine casing temperature. Monitoring the temperature of the external surface of boilers and pipes.
You can find much more useful information in the Documentation tab.
Povpraševanje
You may also like…
For your victories, with our solutions. Call us:
Contact us.
Call us:
+386 (0)2 62 96 720
Email us:
[email protected]