Elpro > Products > Force sensors > F6148 WIKA hydraulic ring force transducer

F6148 WIKA hydraulic ring force transducer

Iskanje

Šifra: F6148

Po naročilu. Pošljite povpraševanje.

  • piston throw ≤ 0.5 mm
  • operateswithout supply voltage
  • galvanised steelhousing andpiston
  • measuring ranges: from 0… 150 kN to 0… 1500 kN
  • relative linearity error ±1.0 % with analogue pressure gauge, ±0.5 % z digital pressure gauge or sensor pressure

Dodaj na seznam želja

Področja:

Description

The F6148 hydraulic ring force transducer, geotechnical version, is available in nominal sizes NS 146 to 1,500 kN.

Combination of cylinder and bata, filled with hydraulic fluid, in coated steel or stainless steel (option), is the basis of the clamping force measurement system. For a nominal size NS 146 , the area bata, which transmits the force, 146 mm2, nominal displacement b and the ata does not exceed 0.5 mm.

Mechanical and electric versions available with direct connected receiver/the measured value display (capillary line or adapter “separation bcutting losses“) and an external version. It is an extremely robust construction, which is in accordance with with the requirements of geotechnical engineering.

S these hydraulic units for measurement forces with clamping forces at easy mode detect at to the head cider and with download directly at screen. The units of force measurement shall be uused for continuous monitoring of anchors and other anchor rods/cables. Hydraulic force measurement units shall be uspent in the field of geotechnologies in various fields. This tunnelling, building bridges and stabilising slopes.

 

Fields of application, applications F6148

Civil engineering and special construction, tunnelling,mining (surface and underground), gedecking and bridge construction , slopestabilisation, resistant walls and excavations.

Povpraševanje