F1211 WIKA compression load cell

Description

F1211 compression load cell up to 1,000 kN.

Compression load cells are used inconsume for Determination compression forces v many apps and So suitable for static and dynamic measurements. They are made of stainless steel and allow the measurement of high static compressive loads up to 1,000 kN.

These products are available with nominal loads from 1 kN to 1.000 kN. Due to their compactness, our compression load cells are very often used inused in industrial applications and in laboratories and test areas. With the additionally available increased precision of 0.1% of the total rock can be used for also used in industrial weighing technology. Spherical callotite (button for u spherical loadconsumption ) makes it very easy to usethe exercise of force. The standard installation of a compression load cell is horizontal or vertical.

Load cells are robust, resistant to b and operate reliably even under harsh working conditions. At Available at is additional feature 100% control signal.

To avoid overloading, is recommended, to electrically connect the compression cell during installation and monitor the measured value. Strength, to be measured, must be concentric and b transverse forcecut. The compression load cell must be mounted on a flat surface.

Special Information

• 100% signal calibration control
  
• suitable traction chain
  
• suitable load plates, see accessories
  
• 6-wire Link
  
• relative linearity error 0.1 % Fnomr

Fields of application, applications F1211

Design Turns and manufacturing lines, mEagle and Control equipment, production Special equipment and machinery, withMove press forces and axial forces stapling.