M1322 Ethernet Multilogger for temperature, humidity and CO2 measurement with 2 MiniDIN inputs and 2 COMET terminals

Description

M1322 Ethernet Multilogger for measuring and recording temperature, humidity and CO2 with 2 MiniDIN inputs and 2 terminals.

The Multilogger can be used as a fixed device with Ethernet connection or as a portable device. It runs on the batteries included. It is capable of measuring and recording values that can be monitored online or saved for later analysis.

The measured moisture value can be converted into other formats: dew-point temperature, absolute humidity, specific humidity, mixing ratio or others. The device comes with a calibration certificate to EN ISO/IEC 17025.

For connection to a PC or other devices and systems, the logger is equipped with USB, RS232 and Ethernet inputs. For wireless connection, the device can be connected to a TP-LINK modem.

Ethernet connection allows

• sending an email if the Multilogger is in alarm,
• in case of a failed connection, the data can be uploaded to the COMET database.

 

Features of M1322

Temperature sensor (external probe/Pt1000 sensor)

• measuring range: -200 … +600 °C
• Accuracy: ±0.2 °C (-200 … +100 °C); ±0.2 % of reading (+100 … +600 °C)
• resolution: 0.1 °C

Temperature and humidity sensor (external probe/T+RV sensor DIGI)

• measuring range: depending on probe type
• Accuracy: depending on probe type
• resolution: 0.1 °C

Rosišče (dew point)

• measuring range: depending on probe type
• Accuracy: depending on probe type
• resolution: 0.1 °Cdp

CO2 sensor

• measuring range: 0 … 2 000 ppm
• Accuracy: 50 ppm + 2 % of the measured value at 23 °C and 1013 hPa
• resolution: 1 ppm

DC NAPETOST

• measuring range: 0 … 10 V
• accuracy: ±10 mV
• resolution: better than 100 µV

DC TOK

• measuring range: 0 … 20 mA
• accuracy: ±20 µA
• resolution: better than 0.1 µA

 

GENERAL TECHNICAL DATA

• operating temperature: -10 … +60 °C
• Input: internal CO2 sensor, 2x pluggable external temperature probe or temperature and humidity probe, 2x binary voltage and current counter
• Recording interval: 1 s to 24 hours
• communication interface: Ethernet, USB, RS232
• Ethernet communication protocols: WWW, SNMPv1, XML, DATALINK
• Power: AC 230 V AC/5 V DC (required for Ethernet interface)
• Battery life: 3-4 weeks
• Protection class: IP 20
• dimensions: 178 x 95 x 37 mm
• weight: 380 g
• Warranty: 3 years
• Set includes: M1322, user manual, calibration certificate with traceability, 3x AA rechargeable battery, power supply, USB cable, wall mount, FREE COMET Vision analytical software

 

The M1322 device is compatible with the COMET Database manager software.

 

For more information, see the datasheet in the Documentation tab.