Elpro > Products > Force sensors > F1226 WIKA compression force sensor

F1226 WIKA compression force sensor

Iskanje

Compression force sensor up to 225 kN

Šifra: F1226

Po naročilu. Pošljite povpraševanje.

  • easyintroduction of force
  • IP67 ingress protection
  • relative linearity error 0.25 % Fnom
  • measuring areas: 0… 25 N to 0 … 225 kN
  • compact design, low installation height

Dodaj na seznam želja

Področja:

Description

F1226 compression force sensor to 225 kN, in miniature form , it is distinguished in particular by its small diameter and installation height for uto meet the rated loads. Thanks to its compact dimensions and robust construction, this force transducer can be, made of stainless steel, uis used in a wide range of industrial applications.

The force transducer is easy to uconsumption and makes installation relatively simple. Due to its small dimensions, it can be used into be used mainly in very tight installation spaces, where the compressive forces are to be measured.

To avoid overloading, is recommended, to electrically connect the force transducer during assembly and monitor the measured value. The measuring force shall bbe introduced through the centre and must not bbe cross-loaded. When assembling care must be taken with the force transducer, the support surface is flat.

 

Options

  • Skip to signal

 

Fields of application, applications F1226

Construction Turns and production equipment, mernal and Control systems, nSee Engineering, pAbsolutely automated Processable centres, gradnja theatres and Reflection.

Povpraševanje