WIKA 80L Hydraulic Hose Tester


Šifra: 80L

Po naročilu. Pošljite povpraševanje.

Dobavni rok: 14 days

  • range: from 7 ... 120bar
  • Accuracy: 0.04 % + 0.015bar
  • operating temperature range: +18 °C … +28 °C
  • ergonomic layout ideal foruse in the field
  • all instruments are certified to national standards


The WIKA 80L Hydraulic Hose Tester, low pressure version, is a portable unit used for the accurate measurement of arbitrary and fluctuating pressures occurring in power plants, pipelines and many other applications.

Basic Principle
For pressure measurement , b masses are added to each unit, which at pressurerelieving under pressure, to be measured. The total force of the mass pulling down exceeds the pressure, to be measured, and the u pressureequilibrium, by uis created by a spindle pump, acting on the stepped surface b and pushes it upwards.

This low pressure is indicated on a precision gauge pressure, which is specifically classified as, that only the meter reading is added to the equivalent pressureu massesconsumed. Weight of the mass carrier u Extent of coverage the scale of the meter and not be mail.

Traceability according to national standards
The piston unit and the test masses obtained with the hydraulic hose testerwere calibrated on the basis of standards following national ones.


To view additional options and more technical features, we recommend viewing the attached pdfs. documents under the Documentation section.


Areas of use, applications 80L

  • testing leak testing and strength
  • steam pressure measurement forperformance testing
  • detecting pressure losses due to friction in pipelines
  • gas pressure monitoring linked to flow measurement
  • measurement of gas pressure v head boreholes and hydraulic test pressure risers of the hose