U6841Msim IoT wireless data logger with three 0…20 mA current inputs and one binary input, built-in GSM modem COMET

Description

U6841Msim IoT wireless data logger with three 0…20 mA current inputs and one binary input.

The U6841Msim Iot kit is designed to monitor three current and one binary input with an integrated GSM modem and SIM card. In case the set limits are exceeded, you can set up SMS and JSON messages for notifications over the GPRS data connection. The measured values can be sent to the COMET Cloud, a complete monitoring, alarm and analysis system.

It is also possible to configure the regular sending of JSON messages to the COMET database, the sending interval is configurable. Alarms are also displayed locally by LED, LCD and audible built-in beeps. You can transfer the data to your computer via the included USB-C cable.

The GSM recorder shall include a calibration traceability certificate with declared metrological traceability of standards based on the requirements of EN ISO/IEC 17025.

Features of the U6841Msim

STREAM ENTRANCE

• measuring range: 0 … 20 mA DC
• resolution: > 1 µA
• accuracy: ±20 µA
• input resistance: 100 Ω
• minimum current: 0 mA (open circuit)
• maximum current: 40 mA

GENERAL TECHNICAL DATA

• operating temperature: -20 … +60 °C
• Input: 3x current input, 1x binary input
• memory: 500 000 values in non-cyclical recording mode; 350 000 values in cyclical recording mode
• Recording interval: adjustable from 1 s to 24 hours
• Power: SONY LiIon 5200 mAh battery
• Protection class: IP 20
• dimensions: 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm
• weight: 270 g
• Warranty: 3 years
• Standard: EN ISO/IEC 17025
• Set includes: U6841Msim , user manual, calibration certificate with traceability, rechargeable battery, power supply, USB-C cable, SIM card, FREE analytical software COMET Vision, COMET Cloud for 3 months

The U6841Msim device is compatible with COMET Database manager and COMET Database viewer software.

For more information, see the datasheet in the Documentation tab.