TEMPERATURE TIPPAL (RTD) with PTFE connection cable and tri-clamp connector

Description

The temperature sensor (RTD) with PTFE connection cable and tri-clamp connector is suitable for temperature measurement in pharmaceutical applications e.g. mixers, autoclaves, sterilisers.

The cable sensor, as it is most commonly called, is a common design for a wide variety of applications. It can be installed in the protective sleeves of tanks, pipelines or with a separate installation element such as compression couplings, flanges or on its own without installation elements. The maximum use temperature depends on the insulation of the connecting cable. A safety spring protects the joint with the cable and allows adequate flexibility, but can be supplied without the spring if it would be a nuisance to the installation.

There are over a thousand temperature sensor products in our product configurator, and the sheer number tells you that this is really about customisation for the purpose of measurement. The right choice will achieve the intended use, all general use of the same sensor for different purposes does not work and is cost ineffective (breakage, disconnection, damage).

Main features

• measuring element: 1 x Pt100, class A according to EN 60751 : 2008, 4-wire connection
• installation length: l custom
• diameter of the protection tube: custom
• tri-clamp connector: custom
• quality of materials in contact with the medium: 1.4571/316 Ti
• PTFE insulated connection cable, l = custom, with Lemo connector or free ends
• made to your design
• Temperature: -50 … +260 °C, at cable connection Tmax.: +260 °C

Benefits

• ATEX CERTIFICATES ENCLOSED:
  • II 1/2 G Ex ia IIC T6-T3 Gb
  • II 1/2 D Ex ia IIIC T260 Db
• tailored to your requirements

 

Custom and bespoke temperature sensor

All temperature sensors can be made to your specifications and requirements. Together with our experts, we find the best solution for you,
special and unusual challenges
we are no strangers to.

The most common designs are presented on the website, but in practice, production is mainly made to order.

Call or email us and we will help you determine/choose the most suitable implementation for you based on your process requirements.

Standard delivery time is up to 5 working days, urgent deliveries within 24 hours (emergency) are possible.

To order a sensor: from the Inquiry box, send your requirements specifying the operating temperature, the desired dimensions and the intended use.

Don’t forget your phone number and email address. We will call you to confirm your offer before implementation.

Find out more about making bespoke temperature sensors here.

Don’t worry, we won’t do anything without your prior approval.

 

Recommendation

We recommend a fitting length of at least ten times (10x) the tube diameter, shorter has a negative effect on the accuracy of the measurement, and the tapered tip is used for fast measurements of other media. It can be in Ex version or in combination with a DIN rail transducer.

 

Additional services and equipment

Calibration

All temperature sensors can also be ordered at an additional cost accredited or with verification only in the desired range and all can be ordered custom-made.

Option at extra cost: ISO1: temperature sensor check at one selected point

Marker plate

Marking is very important for sensors, so you can order a marker plate:

• metal engraved
• plastic with sticker

TEMPERATURE TIPALO RESISTANT (RTD) with PTFE connection cable has a 5 year manufacturer’s warranty and is made in Slovenia.

 

Other designations: TEMPERATURE TIPPET PTFE with PTFE connection cable and three-clamp connector, TEMPERATURE TIPPET RTD with PTFE connection cable and three-clamp connector, TEMPERATURE TIPPET RTD with three-clamp connector, TEMPERATURE TIPPET RTD with PTFE connection cable and three-clamp connector