S8000 precision chilled mirror embedder Michell

Iskanje

Šifra: S8000


Po naročilu. Pošljite povpraševanje.

Delivery time: Depending on configuration; 4-6 weeks approx.

  • Accuracy: ±0,1 °Cdp
  • reproducibility: ±0,05 °C
  • measuring range: -60 … +40 °Cdp
  • working pressure (lower pressure version): 0 … 1 barg
  • working pressure (higher pressure version): 0 … 20 barg
  • Detection system: RRS Triple Detection
MICHELL

Description

The S8000 precision chilled mirror hygrometer provides direct measurement of dew point, temperature and pressure. The instrument is suitable for both industrial and laboratory applications. It is compact and self-contained, allowing essential, accurate measurements without movement.

Dew point measurement is based on the proven, fundamental principle of measuring with optically cooled mirrors, which provide long-term reliable humidity measurement over the entire operating range. The S8000 uses these measurements to offer a range of available units of measurement including ppmV, absolute humidity, relative humidity and ppmW.

The S8000 features a high-contrast LCD touchscreen that offers a fully customisable local display of measured values, along with a trend graph and error warnings.

 

Features of the S8000

  • measuring technology: chilled mirror
  • Precise measurements: <-60 °Cdp
  • FAST technology – guaranteed frost formation below 0 °C
  • measurements at pressures up to 2 MPa (20 barg)
  • Cable length: 2 m (250 m max.) in case of PRT sensor
  • LCD graphic display
  • Power supply: 85 to 264 V AC, 47/63 Hz
  • Connectivity: USB, Ethernet, RS485 or RS232
  • recording data on SD card or via digital messages

 

Areas of use, applications

  • standard laboratory reference instrument
  • measurement standard for the production of high purity gases
  • Measurement standard for the supply of semiconductor dry gases
  • calibration plants
  • research and development
  • monitoring (control) of clean/dry rooms
  • metallurgical processes
  • optimising the coating process
  • Improving the control of metalworking furnaces

 

Software

All S8000 functions can be controlled with the S8000 Application Software – 32/64bit.

 

Articles

You are invited to take a look at the articles ”Better control in metal processing” and ”How to perform chilled mirror measurements”.

 

Video

Povpraševanje

    You may also like…