P8652 Web Sensor – dual channel, with COMET binary inputs
Po naročilu. Pošljite povpraševanje.
Delivery time: okvirno 2 tedna
- measuring range: -55 … +105 °C
- operating temperature: -20 … +60 °C
- channels: 1x probe (sensor) for outdoor temperature,1x pluggable probe (sensor) for temperature + humidity
- Output: Ethernet
- measuring interval: 2 s
- communication protocols: WWW, ModBusTCP, SNMPv1, SOAP, XML
- Alarm protocols: e-mail, SNMP Trap, Syslog
- Power: PoE according to IEEE 802.3af or 5 V DC
- IP degree of protection: IP 30
- dimensions: 88 x 74 x 39,5 mm
- weight: 125 g
- Warranty: 3 years
Description
P8652 PoE Web Sensor is used to measure temperature and relative humidity, with the possibility to connect two external probes, allowing temperature and humidity to be measured in two different locations with a single device.
The temperature display can be in degrees Celsius (°C) or in Fahrenheit (°F). Relative humidity is shown as a percentage (% RH).
Three binary inputs can be connected to the P8652 PoE Web Sensor. Binary inputs allow data or values to be extracted from dry contacts, or from binary sensors with voltage output. The type of binary input is determined programmatically in the device.
The P8652 can communicate and power over Ethernet(PoE – Power Over Ethernet), so it doesn’t need a power supply to operate.
Measuring inputs
- temperature,
- relative humidity,
- binary inputs
Features of P8652
Temperature sensor
- measuring range: -55 … +105 °C
- Accuracy: depends on the temperature sensor selected
- resolution: 0.1 °C
Relative humidity sensor
- measuring range: depending on the selected measuring probe (sensor)
- Accuracy: depends on the selected measuring probe (sensor)
- resolution: 0.1 % RH
BINARY ENTRANCE
- Voltage level for state “L”: < 1.0 V
- Voltage level for state “H”: > 2.5 V
- internal resistance of voltage output: < 2 kOhm
- voltage input: 0 … +30 V
GENERAL TECHNICAL DATA
- operating temperature: -20 … +60 °C
- channels: 1x probe (sensor) for outdoor temperature,1x pluggable probe (sensor) for temperature + humidity
- Output: Ethernet
- measuring interval: 2 s
- communication protocols: WWW, ModBusTCP, SNMPv1, SOAP, XML
- Alarm protocols: e-mail, SNMP Trap, Syslog
- Power: PoE according to IEEE 802.3af or 5 V DC
- IP degree of protection: IP 30
- dimensions: 88 x 74 x 39,5 mm
- weight: 125 g
- Warranty: 3 years
- Set includes: the P8652, user manual, calibration certificate with traceability, FREE TSensor software for configuring the transducer
Articles
Povpraševanje
You may also like…
For your victories, with our solutions. Call us:
Contact us.
Call us:
+386 (0)2 62 96 720
Email us:
[email protected]