M 603 leak detector Wöhler

Description

M 603 Wöhler leak detector with certificate DVGW and test TÜV for measurements to meet the requirements of all users, including utility companies.

Sustainable investment fix z one only device and So You can Safe you implement All tests v stock s Standards MARKETS 2018(gas), DIN EN 806(drinking water) and DIN EN 1610(waste water).

Measurements are quick and easy, as the automatic measurement process ensures simple, standards-compliant and flawless measurements.

The device and the optional locator can also be used to locate metal pipes.

The M 603 leak detector from Wöhler is used for countless applications and willaccompany you for years.

Main features

• From beginners to professionals: complex tasks become simple and precise.
• Intuitive operation: with a large 5-inch colour touchscreen.
• Normalized measurements: based on fully automated measurements with pumps switched on.
• Datamanagement: via computer or mobile device.
• Multiple applications: measurements on gas pipelines and components, drinking water pipes and waste water pipes.
• Up to 60 bar: optional increase in measuring range.
• DVGW certified and TÜV approved: made for tough conditions.
• Wide range of accessories: for all pressure tests.
• Optional extension: Wöhler M 603 detector leakage can easily be up to 3 bar. With the small Wöhler SC 660 Smart Connect , the range is extended to 60 bar.

Operation – To use the detector, you need to select one of these kits to go with the M 603:

M 603 – 12115; basic set (gas)

M 603 – 12114; standard set (gas)

M 603 – 12113; professional set (gas)

Technical features

Differential pressure measurement (temperature compensated piezo bridge)

• measuring range: ±3,000 hPa
• permissible overload: ±3,200 hPa
• Accuracy: < 3% of measured value; within < ±2 hPa better than ±0.06 hPa
• resolution: 0.01 Pa in the range -210 hPa to +210 hPa, 0.1 hPa otherwise

Leakage quantity (serviceability measurement)

• measuring range: 0.0 l/h to 10.0 l/h, tested up to 8 l/h
• Accuracy: ±0.2 l/h in the range 0 to 4 l/h, otherwise 5% of the measured value
• resolution 0.1 l/h

Measuring the internal temperature

• measuring range: -20 °C to 60 °C
• Accuracy: < ±1 °C
• resolution: 0.1 °C

External temperature measurement (optional, e.g. with a temperature probe with temperature clamp or surface temperature sensor)

• measuring range: 2 channels, -20.0 °C to +800.0 °C
• Accuracy: < ±1 °C over the range -20 °C to 67 °C, otherwise 1.5 % of the measured value, according to EN 50379-1
• resolution: 0.1 °C

Measuring humidity

• measuring range: 0% to 100% RH (relative humidity), non-condensing
• Accuracy: ±5 % RH
• resolution: 0.1% RH
• response time: up to 180 min

Absolute pressure

• measuring range: 300 hPa to 1100 hPa
• Accuracy: ±2 hPa
• resolution: 0.1 hPa

Use

TEST USEFULNESS

The serviceability test can be safely carried out with the gas running, so there is no need to flush the gas line.

STRESS TEST

Z relevant Accessories You can at new embedded gas water easily squeeze s to be tested pressure for loadable test (1 bar).

PRESS GAS REGULATOR

You can check the operation of the gas regulator in a few minutes.

FURTHER MEASUREMENTS

Additional pressure and temperature measurements(also in combination with external probes).

PRESS CONTENTS AT CEVEH FOR WASTE WASTEWATER

Before by Tightness at tubes for waste water v stock s standards DIN EN 1610 with Test Sections sealed.

Scope of delivery:

• Wöhler M 603 detector
• lithium-ion battery
• hand strap
• measuring hose 1,5 m
• USB power cable

Articles

Welcome to the article New generation of leak detection

Other designations: M_603, M-603, M/603