F6212 WIKA ring force transducer

Description

F6212 ring force transducer, flat version up to 100 kN is designed for static measurements in direct flow forces. Defined by tensile and compressive forces v many applications.

It is used in applications and test facilities, where a ring geometry with a large inner diameter is required. Typical tasks are force measurement in spindle drives or presses.

To avoid overloading, is recommended, to electrically connect the force transducer during installation and monitor the measured value.

Strength, to be measured, must act axially perpendicular to the force transducer , and b transverse forcecut. Optionally available on the top and bottom with threaded fastening. When installing the force transducer, it is necessary to ensure that thea demolished and hard surface.

Options

• 100% signalcontrol function
  
• setting the nominal power to 1 mV/V
  
• Enhanced nominal temperature range

Fields of application, applications F6212

Cutting tools, mEagle and Control equipment, pSee tables and manufacturing lines, withMove forces for Press and aggregation forces, mErasing forces at spindle drives and spindles presses.