EGS80 digital limit switch WIKA

Iskanje

Šifra: EGS80


Po naročilu. Pošljite povpraševanje.

  • up to SIL 2 according to IEC 61508
  • analogue input 0/420 mA, 2- and 3-wire converters
  • galvanic isolation, line break(LB) and short circuit(SC) control
  • easy set-up of extensive functions on the instrument or with software on a PC
  • two bpotential relay contacts (switching) with status LED and freely programmable analogue output (0 . . . 20 mA)


Področja:

Description

The EGS80 digital limit switch is suitable for many measurement requirements. Ushall be used to monitor force or weight in conveyor systems, cranes, lifts , etc., in Combined z all species of converters forces or gauges loads. To border switch facilitated by Galvanic divorce between Polish and Steering tokorogi and with You can uis also used as a galvanic isolator.

Operated via the control panel on the front of the instrument or via bfree PC software. The software allows easy and fast parameterisation. The setup parameters file can be downloaded from theto create, saved and loaded into any model of EGS80 limit switch. If several instruments need to be parameterised in the same way, the time required b shortens itconsiderably. An adapter cable for connection to a computer with SUB-D9/ plug is available as an accessory.25 or a USB Type-A plug with audio plug.

 

Benefits of the EGS80

  • 2- and 3-wire converters
  • active sources with 0/420 mA signal
  • input has control interruptions lines and short contact of the cable
  • output: 2 relays and one active current output 0/420 mA available
  • Current Output is any scalable
  • the measured value display is a small LC display 17 different display units, such as kg, t, N, bor etc. (optional )

 

Areas of use, applications

Cranes, elevators,conveyor systems, machine and plantconstruction , productionautomation .

Povpraševanje