EGS01 analogue limit switch WIKA

Iskanje

Šifra: EGS01


Po naročilu. Pošljite povpraševanje.

  • 3 relay outputs
  • limit switch for mV/V signals
  • housing for installation at DIN scale
  • easyoperation and set-up
  • adjustable sillcontrol


Področja:

Description

The EGS01 analogue limit switch with relay outputs acts as a DC amplifier for measuring bridges with a voltage meter. The three comparators below, each with one setting potentiometer, allow you to set three different switching thresholds, which atare equal to the specified load of the connected strain gauge force transducer. Each comparator output controls a relay and a control LED.

If the device is switched off or if the power supply is interrupted, the three relay contacts on output terminals 3 to 8 are open. When the device is switched on and under the a properly set switching threshold, the output relays are working and the relay contacts are closed. The control LED is switched in parallel with the relay coil. Holy, as long as the output contact is closed.

Amplifier is designed by for installation v Control locker and by is maybe install at prefabricated bar v housing From extruded profile.

 

Areas of application, applications EGS01

Measuring and Control systems, gradnja machinery and plant, aautomation production.

Povpraševanje