DI30 digital display (indicator) for WIKA panel mounting
Po naročilu. Pošljite povpraševanje.
- converter power supply: 24 V DC
- 2 Available from programmable alarm outputs
- memory minimum and maximum values
- linearisation z to 10 programmable points
- freely selectable entrance: 4 ... 20 mA, 0 ... 20 mA, DC 0 ... 5 V, DC 0 ... 10 V
DI30 digital display (indicator) for WIKA panel mounting is bil developed specifically for displaying measured values from electronic transducers, such as pressure and temperature transmitters.
Offers different input configurations for standard 0/ signals 4 ... 20 mA, DC 0 ... 5 V and DC 0 ... 10 V, which them You can select s Configure connections and Choice Input v configuration instruments. This way, you can also connect transducers with current or voltage signals to the same instrument. Current loop sensors (2-wire) as well as 3-wire and 4-wire sensors can be controlled using the power supply from the inverter. The power supply of the transducer is galvanically isolated from the measurement input.
Two alarm outputs are available.
In addition, the display (indicator) allows sensor calibration and linearisation up to 10 points. This allows further adaptation to different sensor signals and application requirements. Adjustable sampling and display speeds and an input offset for correcting zero offsets and sensor drift complement the standard functions. Functions such as HOLD and TARE are also included. Unauthorised modification of the instrument’s set parameters can be prevented by different user levels in conjunction with a freely selectable access code.
All settings and programming can be done using the buttons on the front.
To view additional options and more technical features, we recommend viewing the attached pdfs. documents under the Documentation section.
Scope, applications DI30
- hardware tools
- construction plant
- Test tables
- measurement level
- General Industrial applications