Elpro > Products > Heaters, solid state relays SSRs and thyristors > “Cuadra” – square heating cartridge

“Cuadra” – square heating cartridge

Iskanje

Šifra: grelci2

Ni v zalogi. Pošljite povpraševanje.

“Cuadra” heating cartridge for larger areas.

Dodaj na seznam želja

Področja:

Description

Primarily, square heating cartridges are designed for quick adaptation in moulds or superstructures where rivets cause problems or cannot be used.

The low-energy heating cartridges are suitable for moderate heating up to 300 °C.

The square tube is made of the highest quality stainless steel tubing.

The tube, which is perfectly calibrated both inside and out, with a ceramic piece inserted into it, only allows it to withstand any further temperature fluctuations and allows even heat distribution.

The primary heating wire is located in a ceramic piece.

Nickel-chromium heating wire is the most suitable for the production of heating cartridges due to its high temperature tolerance.

Coated with a proven granulometric magnesium oxide that covers the entire interior of the heating cartridge.

“Cuadra heating cartridges are primarily designed for applications where moderate heating is a necessity.

 

– mould hardening,Applications:

  • – vulcanisation,
  • – heating of large metal plates.
 
Technical data:

  •  Heat intensity: dimension dependent
  •  Power: depending on dimensions
  •  Working temperature: 350 °C
  •  Length tolerance: +/- 1.5 %
  •  Diameter tolerance: +/- 0.1
  •  Power tolerance: + 5 % – 10 %
  •  Cold zone: depends on length and diameter


1. Welded watertight base.

2. Calibrated stainless steel.

3. Verified pure magnesium oxide.

4. Nickel-chromium 80/20 heating wire.

5. Ceramic core.

6. Hard sieving paste.

7. Lead conductor.


Povpraševanje