CRP5 clean room display panel ROTRONIC

Description

CRP5 clean room display panel ROTRONIC or CLEAN ROOM PANEL for measurement and control of differential pressure, humidity and temperature.

It is equipped with a diaphragm sensor for measuring differential pressure.

GMP-approved and thoughtfully designed, CRP5 is optimised for use in laboratories and clean rooms.

Optical buttons and a detachable HC2-CRP humidity and temperature probe on a magnet allow efficient cleaning.

Up to 6 measurement values and messages can be displayed on the graphical colour display. You can adjust the screen colours individually.

Alarms such as faults, exceeded limits or warnings are indicated on the CRP5 display and can also be transmitted digitally via MODBUS, Ethernet or relay.

Thanks to its analogue and digital communication capabilities, the CRP5 is very easy to integrate into any monitoring system.

Its comprehensive functional capabilities allow the CRP5 to be fully configured for any application.

The CRP5 is characterised on the market by its glass front panel and removable humidity sensor.

 

Feature of CRP5

• FDA and GAMP compatible
• Application range: -5 … +60 °C /0 … 100 % RH
• designed specifically for clean rooms
• measure differential pressure, humidity and temperature
• Accuracy at 23 ± 5 °C: ± 1.0 % full scale (Pa)
• the glass front panel is highly resistant to chemicals
• Optical elements for control with protective gloves
• analogue input and output signals can be freely configured
• Software update: via HW4 software, replaced by HW5
• digital communication via Ethernet RJ45 and/or MODBUS TCP/RTU
• Removable humidity and temperature probes for easy set-up and cleaning

Power supply

• Low voltage: 3-wire

Signal outputs

• 6 relay switch contacts
• 4 independent current and voltage outputs
• Ethernet (Modbus TCP, HW4) / RS-485 (Modbus RTU, HW4)

Variants of models

• panel version with HC2-CRP sensor on the front
• panel version with sensor connection on the back

Measured parameters

• analogue and digital input signal
• differential pressure, temperature and relative humidity
• psychrometric calculations such as enthalpy, dew point, etc.

Measurement zones

• -5 … 60 °C /0 … 100 % RV
• analogue input: 0 … 3.3 V or 0 … 24 mA (freely scalable)
• Digital input: 0 … 1.5 V (low level)/3.5 … 24 V (high level)
• -25 … +25 Pa/-50 … +50 Pa/-100 … +100 Pa/-250 … +250 Pa/-500 … +500 Pa

Screen

• TFT colour display with backlight

 

Areas of application

The CRP5 clean room panel is the obvious choice when a high degree of cleanliness is essential, in addition to accurate measurement of differential pressure, humidity and temperature. It is used in clean rooms in hospitals, pharmaceutical, electronics and food industries and wherever small pressure differences are monitored.

Video

CRP5 is scheduled to end production on 31 December 2010. 12. 2024.

Other designations: CRP 5, CRP-5, CRP_5