632.51+8xx Pressure gauge with capsule and WIKA switches

Description

The 632.51+8xx pressure gauge with capsule and WIKA switches is used for measuring pressure differentials of gaseous and liquid media.

Wherever process pressure needs to be specified locally and circuits need to be switched at the same time, the 632.51+8xx switchGAUGE finds its application.

Switch contacts (electrical alarm contacts) form or break circuits depending on the position of the pointer of the indicating instruments. The switch contacts are adjustable over the full range of the dial (see DIN 16085) and are located mainly below the dial, although partly on top of the dial. The instrument pointer (actual value indicator) moves freely over the full scale range, independent of the setting.
You can adjust the set cursor using the removable adjustment key in the window.

You can also set a multi-contact switch to a single set point. The contact is triggered when the actual value pointer moves above or below the desired set point.

The pressure gauge is manufactured in accordance with DIN 16085 and meets all requirements of the relevant standards (EN 837-3) and regulations for the on-site display of the working pressure of pressure vessels.
Magnetic contact pins, reed switches, inductive contacts and electronic contacts are available as switch contacts. Inductive contacts can be used in hazardous areas. Electronic contacts and reed switches can be used to trigger programmable logic controllers (PLCs).

Features 632.51+8xx

• Nominal size in mm:
  • 100
  • 160
• Accuracy class:
  • 1.6
  • Option:
    • 1.0
    • 0.6
• Scale range:
  • is from 0 … 2.5 mbar to 0 … 100 mbar
  • other units available (e.g. psi, kPa)
  • or any other equivalent pressure and vacuum ranges
• Scale:
  • Single scale
  • Option:
    • Double Scale
• Pressure limit:
  • Constant value of the overall scale
  • Niha 0.9 x total scale value
• Safety against overloading:
  • 50 x value of the overall criterion
  • More on-demand overload protection
• Process connection to the lower measuring flange:
  • G ½ B
  • ½ NPT
  • M20 x 1,5
  • others on request
• Allowable temperature:
  • Medium +100 °C maximum
  • Environment -20 °C … + 60 °C
• Temperature effect:
  • when the temperature of the measuring system deviates from the reference temperature (+20 °C): max. ± 0.6 % / 10 K full scale
• Housing:
  • Version S1 according to EN 837: With flushing device in the housing
• Charging the housing
  • Without
• Zero point setting
  • With the help of an adjustment device
• Wet materials
  • Process link, media chamber, capsule element (pressure element)
    • 316Ti stainless steel
  • Sealing
    • PTFE
• Non-wetted materials
  • Housing, stroke, stainless steel bayonet ring
  • Aluminium dial, white, black
  • Instrument pointer Aluminium, black
  • Setting indicator Aluminium, red
  • Window Laminated safety glass
• Ingress protection according to IEC/EN 60529
  • IP54
• Assembly
  • Rigid measuring line
  • Option:
    • Wall or pipe mounting bracket
    • Mounting flange

To view additional options and more technical features, we recommend viewing the attached pdfs. documents under the Documentation section.

Areas of use, applications

• plant control and circuit switching
• for gaseous, aggressive media, even in aggressive environments
• control and regulation of processes at measurement points with increased overload and range from 0 … 2.5 mbar
• Process industries: chemical industry, petrochemical industry, power plants, mining, offshore, onshore, environmental technology, mechanical engineering and general plant construction

ELPRO designation: MAN-632.51+8xx